ptune

Have enter all the needed valve as stated by Confused, can please help check what really goes wrong here. Still couldnt get the throttle to learn , same error TP ( Main ) no activity. File attach below, thank you. test1.llg

Attach files and pictures test2.pclr Log 2021-04-27 5_35_32 pm.llg

Everything was wired but the throttle does not move as the pedal was depress, APS value moved and learn. TPS does not learn and give error msg, tps main not working. Swap pin 5 and & pin 6 around still getting the same tps main error. What would be the problem? Thank you.

Hi Adam i had the Bosch 82mm Electronic Throttle Body. Evo X pedal pin out as follow : pin1 : +5V pin2: Sensor Ground pin3 : APS (Main) pin4 : +5V pin5 : Sensor Ground pin6 : APS (Sub) connected to Expansion connector 1: As Follow diagram provided by links top down order: PIN 2,5 = Gnd Pin 1,4 = +5V Pin 3 = Volt 11 Pin 6 = Volt 8 Bosch Throttle Body Pin out as follow: Pin 1 : Motor (-) Pin 2 : TPS(-) Pin 3 : TPS (+) Pin 4 : Motor (+) Pin 5 : TPS2 ( OUT ) Pin 6 : TPS1 (OUT ) Connected to Expansion Connector 2: As Follow diagram provided by links top down order: Pin 2 : Gnd Pin 3 : +5V Pin 4 : AUX 9 Pin 1 : AUX 10 Pin 5 : Volt 6 Pin 6 : Volt 7

Do anyone know where to get support from Links?

Do anyone has a wire diagram for Evo 9 E-Throttle with Bosch Throttlebody and Evo X Pedal. Thank you