Jump to content

Africa

Members
  • Posts

    1
  • Joined

  • Last visited

Africa's Achievements

  1. I've got a car running a 1UZFE with a brand new unused Link Plus. Coming close to completing the build and so I thought i'd give it a trial start. With the fuel pumps isolated and the oil system pressurised I sprayed some engine start in the throttle body and it tried to run. I enabled the fuel and the engine caught and after the lifters bled (10 + years no run) the engine ran well for 10 -15 mins during which I started and stopped it a couple of times. Then No start, traced to no spark. Working back I have no CAS signal. I have continuity to the sensors and Trig 1 and Trig 2 on the Link, however the link manual says that I should have a 12 V supply to these from the pin beside the main power in .Tracing this wire(Red White) it goes nowhere. Peeling back the terminated shield cables the other 2, non trig, wires (Brown with trig 1 and green with trig 2) both connect to the shields and go into the shield pin beside Trig 1. So.... should the 12 v (Red/Wh) supply the CAS and Cam sensors and the Trig 1 and 2 wires read the switched voltage ?(as the manual seems to suggest) Or should the sensors switch the Trigs to earth ? What I'm struggling with is the engine ran for 10- 15 mins. Can anyone offer help. Thanks Andrew Hollywood
×
×
  • Create New...