Jump to content

MRE32

Members
  • Posts

    17
  • Joined

  • Last visited

Reputation Activity

  1. Like
    MRE32 reacted to Adamw in Sensors & boost control   
    The ECU has a MAP sensor on board so boost is already taken care of.  IAT is already there.  Oil pressure in a GTR is not connected to the ECU, it is just a standalone gauge in the dash.  
    So my suggestions below are not really super important items to have displayed on the dash but they are good to have connected to the ecu so you can set up some safeties and/or log them (of course they are available to display on the dash too):
    Oil pressure.
    Fuel Pressure.
    Lambda. 
    If its doing track work you may want to consider oil temp also.
    For boost control you will need a 3 port mac valve.  
    Any Link dealer can supply all of this or there are various 3rd party options.  For the Lambda I would highly recommend a CAN bus type controller.  For the pressure sensors make sure they are a decent reputable brand.
  2. Like
    MRE32 reacted to Adamw in boost spike   
    The setting you are looking for is found under Engine Protection>MAP Limit Table 1.  It will most likely look something like below. Try increasing the MAP values that I have highlighted by about 10%.

×
×
  • Create New...