Jump to content

liang

Members
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

 Content Type 

Posts posted by liang

  2. Toyota 20v . Trigger wheel position pls help !!!!

    in G4+

    Posted

    1. I using the 60-2 trigger wheel. The crank sensor is 7afe ( 3 wire ) . Black - earth , red - 5v or 8v ??? . White - trigger 1. the sensor is hall sensor???

    2. (1st pic )the position of the trigger wheel & the sensor is correct or not . 11 teeth face the crank sensor, is tdc . The gab sensor and teeth is 5mm.Pls guide me . Thx .

    3. Trigger wheel size tooth height 4mm, tooth width 2.5mm , distance between teeth 5 mm ,target thickness 5 mm , diameter out side 145 mm. Can I using this trigger wheel  ????

     

    IMG20180524163111.jpg

    IMG20180524163124.jpg

  7. toyota 20v idle going crazy

    in G4+

    Posted

    i using g4+ ecu blue . when i start the engine is 1000rpm engine timing is 10 ( timing gun ) . y suddenlly the idle going up to 1300rpm the engine timing may be 30 or 40 .

     the ignition table 1 i put 0 . and the ignition correction i off it . can any ppl help me solve my problem . 

    if i need to do again the wiring . o other . 

     

  10. DYNOJET WIDE BAND 2

    in G4+

    Posted · Edited by liang

    thanks alot adamw.

    i had key in the table oledi, and try it . but the reading in the g4+ got a bit of diffent from the dynojet wide band on the sreen . 

    so the output value B , i key in 1.114 lambda .is i correct or wrong . pls tell me .

     i use a bowling water and a termometer to cal the temp sensor resistance . water temp . 28c 1.639 kilo ohms ,30c 1.540 kilo ohms

    40c 0.741 kilo ohms , 50c 0.580 kilo ohms ,60c 0.460 kilo ohms , 70c 0.375 kilo ohms , 80c 0.291 kilo ohms , 90c 0.275 kilo ohms ,

    100c 0.186 kilo ohms . air temp . 30c 1.528 kilo ohms , 40c 0.624 kilo ohms , 50c 0.488 kilo ohms , 60c 0.400 kilo ohms ,

    70c 0.386 kilo ohms , 80c 0.337 kilo ohms , 90c 0.283 kilo ohms .  is it correct .

     if i using the std bosch ntc the temp will going high . and i using the bosch 0 280 130 017 it will be low a bit from the std bosch ntc .

     

  11. DYNOJET WIDE BAND 2

    in G4+

    Posted · Edited by liang

    hi there. can any body help me . i got the dynojet wide band2 . how 2 wire in g4+ and setting .and the dynojet wideband got 

    five wire . 1. rpm ,2.analog input ,3. digital ground , 4.12v ,5.ground.

    and got one more questions . my engine is toyota 20v black top . the water temp and intake air temp are diffent . 

    now in the g4+ i using the std bosch ntc sensor type . do any person got the two temp cal table in volt or in ohms.

    thanks alot  

  14. 4age 20v vvti setting

    in G4+

    Posted

    hi there , i am liang .n i am new of this . can any ppl help me 2 settle it  . i just buy a strom g4+ .

    i had  install the ecu but . i cant get the vvti right . my car engine is toyota levin 20v black top .

    i need all of the vvti setting n wiring pls . can any body help .

×
×
  • Create New...