Jump to content

juha

Members
  • Posts

    17
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

juha's Achievements

  1. Olen yrittänyt selvittää näiden suuttimien arvoja. does anyone else use it if so with what values
  2. Hi can I run the fuel pump controlling this relay SSR-480D125, I noticed that the output is AC Input 4 - 32VDC Output 125A, 600VAC Purpose to make adjustable fuel pump control
  3. juha

    Thurner + Flexfuel

    Hi Adamw can you help me I now have E85 and 98 focal maps. But I don't know how to do Flexfuel settings Can they make a Flexfuel file ? Camaro 98 .pclr Camaro E85.pclr
  4. juha

    Thurner + Flexfuel

    Hi Can you help once again.I don't know how to do Fluxfuel settings.All necessary sensors are connected.And can you look at that map as well.It has an awakening problem between 1000 and 2500 rounds.Engine and Nozzle Details.Chevy Big Block : 509ci- Fuel injector 12 pc x Bosch EV14, 1500 cc, 8.5 Ohm, Jetronic, short O-O 34 mm (Bosch 0280158333)- 8 pc Insuction manifest- 4 pc before superchargers- fuel pressure 3,5 bar- 2 pc x 2,3L Whipple Superchargers- Maximum boost pressure 0.8 bar- now fuel maps made for RE85 fuel- I would like to be able to drive with 98 fuel as wellEngine photo attached and map. camaro 19-7-22 rev 1.pclr
  5. Thank you Adam. works well
  6. Yes i can move. only Ain4 and Ain5 Ain 4 oil pressure Ain 5 Fuel pressure 150 Psi
  7. I had to change the AEM 30-2226 Can converter to —> Cancheckd mce18 converter. (MCE18 - Can Bus Extension > Displays für Motormanagements (canchecked.de)) Now I can't show up information Link ecu camaro 11-3-22 rev 1can setup 150psi.pclr MCE18 CAN Wire.xlsx
  8. cancheck mce18 if you connect the link to the 4g + can bus. need to change new settings for cancheck mce18? now i don't get the data to show in ecu
  9. thank you I don't own the device yet. Only in the reflection phase Do you have experience with this device https://www.turbozentrum.de/CANchecked-MFD28-Universal-28-Display_1 Can I get 8pc EGT for this screen https://store.perfecttuning.net/product/universal-gauge-for-vi-pec-linkecu-g4-g4/ at the same time to appear?
  10. from this screen https://www.diyautotune.com/product/perfect-tuning-universal-gauge-ms3pro-ms3-ms2-microsquirt/
  11. is it compatible? Is it possible to get data via Can bus ?
  12. I connect 2 heat sensors and 2 pressure sensors.
  13. That is, I put the meter on the can 1 bus and the Aem module on the can2 bus. did I understand correctly ? does can line AEM module require 120ohm resistor?
×
×
  • Create New...