Jump to content

TSP

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by TSP

  1. @Adamw Made some changes as requested with no luck, Removed fuel pressure and oil pressure inputs, confirmed fuel pressure with mechanical gauge. Fitted new spark plugs - bcpr7es . Confirmed timing with light, all ok. Attached is log file during cranking, and modified PCL . supra crank no start pcl.pclr supra crank no start.llg
  2. Hello, having issues with a supra not starting, fresh build. fitted with a link g4 fury, Factory trigger, r35 coils. Attached is the base map currently in the vehicle and trigger log. attached is trigger scope and pcl file. have decreased trigger arming voltages without success. spark is weak when cranking, perfect when coil testing. Good fuel pressure 3 bar, and injectors working. Confirmed engine timing, compression etc. Trigger Scope Log 2023-07-2 5;50;50 pm.llg supra.pclr
  3. Attach is a pcl as you request. cheers. Hayden iggo dx sr20det.pcl
  4. Yup the ecu will still hold power, But if i turn Aux 3 off in pc link, then it will run fine, it seems to only happen when the fan is grounded. I will attach the map file when i get back. cheers.
  5. Cheers for the reply, its defiantly from a ignition source, Attached is a diagram of how i have the relay set up. if i remove the Ground 86, to the relay it will still run on. and if i switch the aux 3 off, it will run as normal cheers.
  6. hello, I have a link atom installed using aux 3 to control n/c relay for a engine fan, I have set the polarity up and engine temp and its all working like it should, The only problem i have is when the engine reaches its operating temp of 82 degrees the fan will switch on like it should but when the ignition is turned off the car will run on and after about 5 seconds will drop power and turn off. This only happens when the fan is running. any thoughts would be appreciated cheers.
×
×
  • Create New...