Jump to content

cristanggo

Members
  • Posts

    6
  • Joined

  • Last visited

cristanggo's Achievements

  1. Yes sir, wiring correct i have see on your post before. This video when use 1nz coil IMG_2354.MP4
  2. Wire coil first only connect 12v-signal-grnd big. ... result nnt cranked last i try connect pin grnd small parallel coil 1-6 tab to head grnd.the result is coil 1 sometimes flares out the fire sometimes does not burn, as well as other coils. For example, I installed the timing light on coil 1 not turning on, then I moved to coil 2 on as well as coil 3-4 on, coil 5 didn't turn on and coil 6 was on. but I tested it using the software link to make it fire. then when it is tried again to replace the unlit coil with the one that is lit there is still no fire. is my ignition order data wrong. please help The picture is when i try to chance coil not fire with the fire one. Result is that life coil has a fire when it is moved to coil 2, witchis dead but the fire does not come out either. Could help me, if the wiring pinout coil R8 is correct, what is the possibility of mapping software? if so can you please give me a basemap 1jz vvti with r8 coil direct order. thank you
  3. Dear bro, anyone have build this before? I have 1jz vvti with ar70 ,700cc injector , and r8 coil. The engine start normal with coil 1nz. When use coil r8 the signal take turn on/off while start crank. Pin order left to right (grn-signal-grn-12v) thx u for help IMG_2355.MP4
×
×
  • Create New...