Jump to content

Mr Rieper

Members
  • Posts

    6
  • Joined

  • Last visited

Mr Rieper's Achievements

  1. Hi Vaughan Yes pretty much. I usually set the tablets up with a few different displays and have the status windows on there so the customer can see when things are active. With them being touch screen they seem to think the window is an on/off switch even though they usually have a switch wired in for whatever function it may be. Thought I'd bring it up as it would be quite a nice thing to have. Rough example but you get idea.
  2. I've set up a good amount of tablet displays for customers and 9 out of 10 of them always try clicking on the status window for a certain function e.g ALS etc. I've no idea how difficult this would be to implement but think it would be fantastic for the end user. I think this could be a great option to toggle certain functions like fuel/ignition table set,boost target,fan control over-ride even as well as the motorsport features,maybe even a launch rpm bump up/down function. Not sure if someone may have asked previously but read through a good amount of pages tonight back to around 2018 so thought i'd put it up. Hopefully i'm not the only one that thinks this. Thanks
  3. Mr Rieper

    wrx9x vvt help

    Firmware update resolved this issue now sits bang on target. thanksfor the help.
  4. Mr Rieper

    wrx9x vvt help

    Hi guys Hoping someone can help me out with the new vvt setup process as i'm having a few issues with it. I've done the calibrate as per the Link help and it was throwing a bunch of errors once the lockouts were passed on a static 1500-2000rpms. i adjusted the tooth offset slightly which stabilised it but still get a bunch of errors in the midrange which seem to clear up after 5000rpm or so. The vehicle has Piper 276 cams installed for info purposes. i'll attach a log. Any help would be great but i'm assuming it'll be a case of setting everything manually ? Cheers vvt issue.llgx
  5. Thanks for the replies So it's a no go at the minute then as you would lose functions such as DCCD and others if you were to say use a wire in on a custom loom. Cheers
  6. Hi everyone I was just wondering if there is a solution available for the Subaru hatch which runs can. I'm aware Syve## is available but Was curious if anyone has made something from the LINK family compatible for the hatches. Cheers
×
×
  • Create New...