Subielover78

Moving iat to better location this week... then re adjust map.. its been 95% better... no more idle issues... friend went through and found the issues.. getting her sorted out

Second location... super heat soak Cant upload intercooler one, only 123kb... keeps saying too big

So... wheredo you guys usually put the iat on a tmic Subaru? First time was in the intercooler, seemed too sporadic... second ( heatsoak city) was in the intake between the pwr steer pump and alternator, any other suggestions, if i go back that route?

I get that.. he just isnt versed in dbw stuff.. so he sat last night and read up on it...did a lil tweaking... but it got late... so we called it a night.... gonna get back at it today round 2 california time...

the maps i posted ar all versions done by a " link pro tuner". i do not have a subie tuner...as there are not any link tuners really near me .. local guys use cobb or aem..the only link tuner is about 3 hours away and super pricey . the guy looking at it tonight, basically only does 3sgte and 2jz .... the iat i WAS using, kept reading around 160f+ ( which was put there by a former link tuner...) and it would just get heat soak like crazy..... if this guy cant figure it out.. i hate to say it.but. ill have a g4+ for sale, im over the headache... and ill just go back to cobb, as there are more than 5 cobb pro tuners within 100 miles of me

we are starting over tonight.... just doing it all over..... the iat was killing everything.... but i do have a question... im going to use the factory 04 sti maf for the iat for now.... which is the best option int the calibration choices?

The knock sections keep changing... they zero out, after i save them to my pc... as brad above mentioned his did wonky stuff too... as for the logs... one of them I believe, shows the starting issue... its def heatsoak, as i experienced it heavily last night... almost got hit twice ,due to the car stalling out at a stop light once it got hot outside... im having a tuner look at it tonight, hopefully he can sort some of the problems out . Found the heat soak issue... need to relocate the iat... first tuner, put it in a bad spot... any suggestions of best place? Im running the smaller aem one... was in manifold between power steering and alternator... got super hot there... so we went back to the oem one for now

The knock sections keep changing... they zero out, after i save them to my pc... as brad above mentioned his did wonky stuff too... as for the logs... one of them I believe, shows the starting issue... its def heatsoak, as i experienced it heavily last night... almost got hit twice ,due to the car stalling out at a stop light once it got hot outside... im having a tuner look at it tonight, hopefully he can sort some of the problems out .

newest log Log 2018-04-2 11;41;14 am.llg Log 2018-04-2 11;13;44 am.llg Log 2018-04-2 8;05;59 am.llg

yeah... i just loaded a different map in that had some cells calibrated.... closed pclink... open map again... they are zeroed out now.... AAAHHHHH im gonna put up the map i have on now.... ran waaay batter on way to work.. but i couldnt log 4-2.pclr

here is the last map I know was working..somewhat ok... knock is not all 0 . so , im not sure how it got to 0 ffff.pclr Ok, something is off... i compared two maps , one saved three hours after the other.. only adjustmentd done were to e-throttle calibration and map sensor .... knock setup is totally diff between the two maps... Ive never touched any knock stuff.... wtf

Weird.. the odd thing, the car was running great , besides the idle until just last week..and i hadnt touched anything except some quicktune fuel stuff that scott said might help

Yeah, im goingto have to figure something out $1600.00 and a 5 hour round trip isnt in the budget right now... and with it getting hot in california right now, heat soak will be a big issue... thanks for your time... its 11pm here.. i gotta sleep...

Well, any help fixing the issues would be appreciated... im not a tuner, my former tuner, no longer works at the shop. Closest shop that tunes link is over 2.5 hours away... i have a friend that helped get it better than it was, but he isnt available much...

Im agreeing with the heat soak... i dont know how to set up the logging parameters, i thought it was in there sonewhere...... i know it shows on the right while im recording.... And lambda, ive never used that term.. used to just hearing AFR.. .. so not sure what i need to setup in the logging

so I changed the speed lock out back to driven wheel speed... I no see gear changes in the logging... ?? lost on that.... here are the new logs of trying to start with out holding the throttle open... then of course I had to a lil and one of my doing a cruise through the neighborhood mmm.llg mm.llg m.llg and now my pclink will not open or play any of my logs... :-(

sure , it was working before...but never said the correct gear... I tried inputing the actual gear ratios.. and it got wonky on me.. I must of forgot to put that back to driven wheel speed.. but it still does the hard starting thing even with the idel speed set up.. I was reading through the help guide on charge temp approximation.... would the new setting even work if I tried it? new map attached charge temp tweak.pclr ill go do another log with it reset.... be right back

Im thinking it does has to do with heat soak, as for the leaning out, i havent noticed any lean fueling.. mainly overly rich

Yes, I have an afr/lambda sensor..... problem is, i cant recreate the issue in a log.. never seems to record it... ill attach two short logs from this morning, and the current map , that link tweaked a lil asap.. ill try to record the failing restart tonight.. ffff.pclr sorry there is a lot of logs, but I wanted to make sure I caught the issues.... thanks for your time guys Log 2018-04-1 8;27;44 pm.llg Log 2018-04-1 7;36;24 pm.llg Log 2018-04-1 7;13;12 pm.llg Log 2018-04-1 7;07;30 pm.llg Log 2018-04-1 7;02;07 pm.llg

Scott and Simon at Link , AND the tuner have looked at it... neither could find the issue... ...im thinking its in the e-throttle, and post start/ crank fueling? The tuner is a friend of mine, but he does not tune dbw cars, he mainly tunes 3sgte and jz engines.. i played around in some of the p.i.d. settings. And anti stall gain.... its def better , but still does the idle drop/stall after a small drive...

ok, just hoping someone can help... ever since I put in my link ecu, ive had issues with idle.. tried numerous things... nothing ever helped.... anyway the issue.... if I drive for about an hour, turn of the car, let it sit about 30 mins.. try to start.. falls on face and dies numerous times... I have to hold idle around 1000rpm for 10 seconds... then it will stay running.... once every so often ever its runiing.. if I back up, car dies, have to restart..... also when a/c is turned on... idle is not stable, and a few times.... it will not catch idle after compressor turns on... it idles up,then falls to 500 rpm.. struggles, then sometimes just dies... if sent a few logs to link with my map.... stumped... sorry for rambling... any help would be appreciated... I do not tune... and this never happened on my stock ecu....