Jump to content

CRSKmD

Members
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • Gender
    Female
  • Location
    South Australia

CRSKmD's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. update. the baud rate was set to 19200 changed to each level power cycling each time and it worked at 115200 set to Auto 624k and its all good
  2. Not that I can see. The unit is a plug and play inside the stock housing. The place I bought the ecu from put it in the stock ecu housing for me. There is the round plug with the USB adapter and an expansion loom coming out
  3. Hi all, new link owner but unable to get it to connect to PCLink. ECU Link G4+ R34 GTT Error: "Unable to connect to the ECU but USB connection is present. Please cycle the power to the ECU." Checked in device manager and am able to see the Link on COM port 5. if i pull the USB plug out it disappears from list when ignition is on there is a green led that lights up on the ECU i can see through a screw hole. attached are the voltages seen at each Pin when Ignition is on. any more information required please let me know.
×
×
  • Create New...