Search the Community
Showing results for tags 'basemap'.
Found 4 results
-
Below is a base map I have loaded onto my ecu from a different forum on here,which I did tweak a little bit. But I still cant get it to fire. I have a jzx110 1jzgtevvti into my Silvia s15 240sx.Ecu is a link fury g4+ wire in. with a brand new wiring harness. all aux out puts are correct from what ive seen. can any one look over the base map and see if im missing something. Mods are lq9 coils (which I converted to direct spark) cant seem to get the dwel where it should be . Between 5.5-6ms stock 1jzvvti injectors. converted to drive by cable, cant seem to find where to convert t
-
Hi guys, chasing a base map /start up map for my link g4+ extreme running it on a 1jzgte vvti. 1000cc injectors Stock ingition and ignitor No dbw or ethrottle. 264/272cams To4z turbo Stock everything else
-
2jzgte vvti aristo motor with a G4+ Kurofune Hey new guy over here. Can anyone help me out with a base map? Stock or with the mods listed. Preferably with the mods! Thanks in advance. Email is calvinjroa@gmail.com Borg s366 BC 264 cams 1000cc FIC injectors 93 octane
-
Hi, we've recently installed a Link G4+ Fury on our S13/1jz swap. We'd used a 2jz basemap from online to fire up the ECU and test the coilpacks and injectors were all firing (in test mode). All worked ok. However, when we tried cranking the engine to start - injectors and coils won't fire. We suspect it was crank angle sensor trigger wheel settings, and tried a couple of settings found online but made no difference. Engine turned, just no spark or fuel. Does anyone have a basemap for a 1jz non-VVTi that we could try to just get the engine running before we take it to a tuner for mapping? Wa
