Search the Community
Showing results for tags 'tunning'.
Hello Guys, Im new to the Forum I got couple questions for the PRO's In this room > I have a 2JZ VVTI Customized Engine ( A to Z ) 3.4 L I have 2 MAPS im going to attach, Both are working perfect, Lucky for the 2jz vvti Car owners, They can use my map's ( Im Not responsible about any damage to you car ) Ok I tuned my car in 2 different Engineers And im not sure which one is right, both tuned the car Ignition and fuel table, I need to make sure the value's Of the Ignition and fuel are correct. I have the following setup 750 cc Bosh Injectors with 4 Bar Fuel Pressure Single Turbo dual bearing set at 1.8 BAR starts @ 2500 RPM Using 98 Octane Fuel Off course the biggest intercooler , AKS dump valve , External WAsteGate, MONSON ECU Appreciate Your thoughts and advice the car is running great but not perfect, i know there is something wrong with the ignition and fuel Holding the car power back, i know i can get much more power Of such engine I set my AFR to 13.7 2jz-1.pclr 2jz-1-extreme.pclr
hi , Im trying to log my cylinder pressure during ignition and how my tune if effecting the ignition pressure i have connected an analog in cylinder pizo sensor with 0-5v output connected to my link analog input and i have set the calibration table as provided by the manufacturer till 2000r pm the pressure is shown and it seems logical but after 2000 rpm it 0 any ideas on how to log the in cylinder pressor til 7000 rpm thanks
Hi there I have 96 JDM 2L Subaru engine that I am trying to tune. Was wondering if anyone could give me a hand with my ignition map. I’ve tuned cars before but I don’t feel comfortable playing with the ignition map on this car cause I don’t have a knock sensor. So I was wondering if anyone with a similar setup as me could help setup a slightly conservative ignition map for my setup. I have a GTX 3582 turbo on a EJ20 with 850 cc injectors. My fuel table is pretty good I just need help with the ignition table. I’m willing to pay for someones time as well just let me know. Attached is a image of what I am running now.