Search the Community
Showing results for tags 'base timing'.
Found 2 results
-
Apologies for noob like question, but i'm getting myself confused here. I'm about to update the firmware to 6.20 and i want to be clear about the procedure for resetting base timing if needed .... currently the car was set up up with the timing locked to 10'BTDC when calibrating. However, I want to check the base timing first (with no ECU corrections) and make sure it is set to 15' BTDC (which is correct for this RB25DET engine) then recalibrate the ECU/trigger after the firmware upgrade. So my question is, do I need to set base timing with the CAS to 15' without starting the car first? before i do the base timing calibration in the ECU? or does the 'set base timing' function in the ECU do all this anyway? many thanks
-
Hi Everybody, I've been lurking the forums for quite a while and found the information here very useful. That said, i have a little problem with my current BMW M54, swapped into an E36, and couldn't find any information on this. Engine is a M54B30, but vanos has been converted to single vanos to make it look like an M50. I have used a timing light to align the trigger offset angle to the mark on the block, and tried adding 360 degrees to it as well, but car still does not start. I have uploaded my base map for your kind perusal. If you guys have any idea why the car is not starting please give me some advice! Thank you. Kevin Dylan m50b30.pclr
