Fotis Posted June 30, 2019 Report Posted June 30, 2019 Hi everyone, can i use my stock OEM knock sensor to work with Link ECU G4+ or do i need a controller? Thanks! Fotis. Quote
Simon Posted July 1, 2019 Report Posted July 1, 2019 Assuming the ECU you have supports knock then it is just a case of wiring it to the ECU. Quote
Fotis Posted July 1, 2019 Author Report Posted July 1, 2019 I should wire it as a knock 0-5V Analog? Quote
Simon Posted July 2, 2019 Report Posted July 2, 2019 There is a dedicated knock input on ECUs that support it. What G4+ ECU are you working with? Quote
Fotis Posted July 2, 2019 Author Report Posted July 2, 2019 Its a pnp link g4+ 96+ HC. I havent seen a dedicated input on the manual. Quote
Simon Posted July 2, 2019 Report Posted July 2, 2019 96+ is all set to go it is expecting the knock signal on pin D6. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.