Wes Posted July 4, 2019 Report Share Posted July 4, 2019 Hi, we have a Suzuki G13B twincam engine (stroked 1300cc with ITB's and coil per cylinder), we are using a G4+ Atom II on it, what trigger pattern should we be using? There is only a sensor on the back of one of the cams, nothing on the crank. Cheers Wes Quote Link to comment Share on other sites More sharing options...
Simon Posted July 4, 2019 Report Share Posted July 4, 2019 You will have to fabricate something to suit. That pattern is not supported. I would look to removing that wheel and pressing on a 24 tooth wheel with a tooth removed. Quote Link to comment Share on other sites More sharing options...
Wes Posted July 5, 2019 Author Report Share Posted July 5, 2019 Thank you for the quick reply, as long as we know we can't use that pattern we'll make something that we know will work :-) Cheers Wes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.