Senior GT Posted July 17, 2019 Report Posted July 17, 2019 Hi there, just a quickie, updated to latest firmware ( 5.6.7.3631 ), following this I loaded the pre upgrade file for a compare, and all looks well, aside from the table allocation having swapped Knock Target and Cylinder 1 Trim Tables, causing them to display out of order in the Knock settings menu.... Normally wouldn't worry, but I was closely involved with some of the knock control issues in the firmware a few years ago, so wanted to confirm this wasn't going to produce similarly unwanted results. Thanks. Quote
Simon Posted July 18, 2019 Report Posted July 18, 2019 If you check the figures in the actual tables if they are all as they were you will have no issue. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.