Jump to content

Knock setup tables


Recommended Posts

Hi all

Busy setting up a Subaru 22B P1 for a customer ( STI V6 model). Under the knock setup, again there is no values, can anyone send me the knock tables, using the built in knock sensor ?

ECU Setting -> Knock Control -> Knock Target . My tables are all empty.

 

Many thanks in regards. 

Link to post
Share on other sites

The knock target table needs to be set up by your tuner using audio knock detection equipment after properly tuning your ignition table to suit the fuel and other variables.  The knock signature of the engine is affected by a huge range of variables so you cant just copy settings from a similar engine.

Some of the other settings such as frequency channel and cyl gains etc will probably be similar but the knock threshold (target) table will be completely unique for your car.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...