Jump to content

1JZGTE Non-VVTI - Storm ECU


sokudo performance

Recommended Posts

Hi all, 

 

I have installed a storm ecu on a 1jzgte non-vvti engine. I have a wiring specialties pro harness with a interface harness. 

I am currently working on a start up/base map and i am running into a non-start issue. 

I have tested the injectors and coils and all work correctly in test mode, but i am not getting spark while cranking. I have looked up the trigger parameters in the help section and have put in the desired trigger settings for trigger 1 & 2, (trigger 2 VVT set to OFF). I also noticed i am not registering a engine speed either, so i assume my trigger is off. I have a aftermarket intake manifold, so cam sensor is going to the sensor closest to the cam gears. 

I was hoping one of you experts could take a look at my calibration file and give me your thoughts. 

image.thumb.png.d398cd278185d6be38151aca2f24d189.png

 

Thank you in advance for the help.

 

image.png

1JZ Stand alone - base map v3.pclr

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...