tiago Posted November 28, 2019 Report Posted November 28, 2019 Hey guys, I decided to swap my intake manifold from a sti V6 to a V7 to get ride of the ISC stepper and also I removed the coil pack to use Direct Spark. What would be the best approach to wire the coils? Use the loom Ignition Drive 7 and 8 + the current Ignition Drive 1 and 2. Or Could I use Aux 7 and 8 for the coil since I'm not going to use it anymore? Or better rewire the Engine Fan to use Ignition Drive 1, 2, 3 and 4 on the coils and move Aux 7 and 8 for the fans? Any other tip or advice on that? Quote
Simon Posted November 28, 2019 Report Posted November 28, 2019 You have to use ign 1-4 for the coils if going individual Move the engine fans over to the freed up Aux 5-8 drives Quote
tiago Posted November 28, 2019 Author Report Posted November 28, 2019 26 minutes ago, Simon said: You have to use ign 1-4 for the coils if going individual Move the engine fans over to the freed up Aux 5-8 drives Do I need to wire ign 1-4 to the respective cylinders? Like: ign 1 to cylinder #1 Ign 2 to cylinder #2 Ign 2 to cylinder #3 Ign 2 to cylinder #4 Quote
JMP Posted November 28, 2019 Report Posted November 28, 2019 yes, wire them like that, then the firing order is set in pclink Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.