Jump to content

Oil pressure sensor question

Recommended Posts

Hi there, I brought a link g4 plugin for my rps13 sr20det street car, and wish to install a 150psi honeywell oil pressure sensor as extra insurance to protect my motor, will this replace the factory oil pressure sensor in my block? Or do I need to run both?


I have a custom oil block adapter fitted to my engine which does not have any ports to fit the factory sensor, the attached photo shows my aftermarket sandwich block with the factory sensor, there is little room for extra sensor to fit in the other port that's blocked

Thanks in advance!



Link to post
Share on other sites

Then one option is to swap that switch for a proper pressure sensor.  You can then connect a spare aux output to the old oil press switch wire and use the ecu to switch your oil press light on when the oil press is low.  

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...