Guest |577| Posted June 12, 2011 Report Share Posted June 12, 2011 Hi Ray, I've downloaded the latest firmware and would like to know how to setup traction control based on driven and non-driven wheel slip %. It is on a FWD Honda. Should i use a 4D ignition table with the axis changed to x axis RPM and Y axis Slip%? Can i use the abs sensor as speed input for traction control? Thank you Ray! Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 12, 2011 Report Share Posted June 12, 2011 This post shows how to setup traction control using wheel slip and ignition retard. http://www.vi-pec.com/forum/viewtopic.php?f=3&t=285 This method only works if the road conditions are always the same as the road you set it up on. Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.