Jump to content

323Link help


Recommended Posts


I recently purchased a 323 that has a gtx turbo motor (bpt) and it had a factory ecu and a link ecu also with it. (Mx5 18 v1.4). It appears to have had a repair/damage to the board and a transistor removed (see photos). Could someone please advise if this unit is still serviceable and what my have caused this damage. Car appears to start on the ecu but the motor is still not right yet (previous owner has been mucking about). I have read the 323Link g1 manual (I assume that’s the same as this one) and understand there is a map sensor missing and possibly hasn’t had the tps voltage dropped. 

it also has a serial box with it, are these units pc tuneable?

any help would be greatly appreciated as would any tuner recommendations in Melbourne Australia. 







Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...