Analogue inputs config appears to be locked?

[RobinHodges]

Hi, 

Having wired in my G4x Storm, I'm just configuring the inputs. 

For some reason the analogue input settings appear to be locked (there is a padlock symbol on the right hand side of each config window for each channel).  I have exhausted my Google search on this, and I can't see anything in the help file about it. 

Are you able to advise?

Config file attached, and screenshot of the padlock symbol I'm referring to. 

Thanks in advance.  I appreciate this is probably a very basic aspect of the software functionality, but I really cannot find the answer!

map_1.pclx

[RobinHodges]

Ok scratch that. It appears you assign the inputs by first selecting a function, then allocating the input pin. 

[TechDave]

Yeah, so this is really the most important functional change between G4+ and G4X, instead of pins assigning functions, now functions assign pins.

[mattj]

I'm having the same issue.  I don't understand why I can't double click on the item when it's locked.  My analog functions aren't locked, but my Trigger settings are?  What is happening here?

[Vaughan]

1 hour ago, mattj said:

I'm having the same issue.  I don't understand why I can't double click on the item when it's locked.  My analog functions aren't locked, but my Trigger settings are?  What is happening here?

Correct me if I'm wrong @mattj but you have a G4+ not a G4X so this thread isn't relevant for your ECU. The Trigger Offset and Reference Timing values are set in the 'Set Base Timing Window' right below those two settings.

[mattj]

4 hours ago, Vaughan said:

Correct me if I'm wrong @mattj but you have a G4+ not a G4X so this thread isn't relevant for your ECU. The Trigger Offset and Reference Timing values are set in the 'Set Base Timing Window' right below those two settings.

Ah, I didn't see which group this was in.  Google found it for me.  Thanks for the input though.  I do have the same locked out experience, but I figured out why.  Looks like that is the case when that feature is to be managed elsewhere.