jrizing Posted March 20, 2020 Report Share Posted March 20, 2020 Guys can you please take a look at the attached trigger scopes and suggest what values I should use in the arming threshold tables please. Trigger Scope Log 2020-03-19 2;02;21 pm 2000RPM.llg Trigger Scope Log 2020-03-19 2;08;11 pm 3000RPM.llg Trigger Scope Log 2020-03-19 2;08;45 pm 4000RPM.llg Trigger Scope Log 2020-03-19 2;19;40 pm START UP 0RPM.llg Trigger Scope Log 2020-03-19 2;01;17 pm 1000RPM.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 20, 2020 Report Share Posted March 20, 2020 Something like this will do: Quote Link to comment Share on other sites More sharing options...
jrizing Posted March 20, 2020 Author Report Share Posted March 20, 2020 Excellent thanks mate. Quote Link to comment Share on other sites More sharing options...
AlexSavv Posted October 13, 2020 Report Share Posted October 13, 2020 @Adamw Would you be able to take a look at my trigger scope below and recommend the same? Alex Trigger Scope.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 13, 2020 Report Share Posted October 13, 2020 Do you have a trigger issue? To correctly set your arming threshold you need to do several different trigger scopes at the various different RPM's as the OP above done. But I would only bother if there is some problem, you appear to have good voltage so probably doesnt need to be any different than the default values. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.