lostsoul Posted March 23, 2020 Report Share Posted March 23, 2020 This has been a issue for a little while, my last attempt to fix was to run new shielded cable from the knock sensors to the ECU .... no improvement. Any ideas as to what is going one?? Attached is my PCL and Log https://drive.google.com/file/d/1ofvk8_fz3JtWNs0tXhPLgzFxHx9FFcdZ/view?usp=sharing 1 TPS Fuel Table Load DEFAULT.pclr Quote Link to comment Share on other sites More sharing options...
lostsoul Posted March 24, 2020 Author Report Share Posted March 24, 2020 Would a "dodgy" TP Sensor cause this? As you can the TP is way above the low lockout setting. Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 24, 2020 Report Share Posted March 24, 2020 Its a bug. Happens to me to. I have to cycle ecu power to reset. Quote Link to comment Share on other sites More sharing options...
lostsoul Posted March 24, 2020 Author Report Share Posted March 24, 2020 Does this Bug just effect the logging or does it also de-activate the knock control? Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 24, 2020 Report Share Posted March 24, 2020 I think its just logging. Tech support would be best to answer that one. I knew they had troubles replicating the issue. Which modle ecu do u have. Quote Link to comment Share on other sites More sharing options...
lostsoul Posted March 24, 2020 Author Report Share Posted March 24, 2020 Thunder Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 24, 2020 Report Share Posted March 24, 2020 I take it its one of the early ones too? Quote Link to comment Share on other sites More sharing options...
lostsoul Posted March 24, 2020 Author Report Share Posted March 24, 2020 Yup Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 25, 2020 Report Share Posted March 25, 2020 Yes, I believe this is a bug, I remember reporting it some time ago and the engineers took a look but couldnt reproduce it. I suggest you report it to Link tech support, the more people that pass on info the better the chance of it getting more attention. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.