CJL Posted April 30, 2020 Report Share Posted April 30, 2020 Hi there, I do apologise if this is a stupid question but this is my first time ever! been reading about setting up a Cal table for a fuel level reading for my MGX 1.2 Strada, however I'm unable to adjust the table size or percentage values. example: I'd like the percentages to start at 100% counting down to 0% where I then fill in the voltage values. when I try and do so I end up with a table starting at 100% all the way up to 400 and something. thank you in advance. chris Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 30, 2020 Report Share Posted April 30, 2020 Have a look at cal tables 7-10, they have more configurable axes. Having said that, you will get a better result by connecting the fuel level directly to the dash rather than ecu, the reason being that the dash has configurable filtering so you can dampen the fuel level signal so you arent just watching the fuel level bounce around from slosh. If you connect to the ecu you will need to add a small RC filter circuit to slow it down. Quote Link to comment Share on other sites More sharing options...
CJL Posted June 4, 2020 Author Report Share Posted June 4, 2020 Thanks Adam, apologies for late reply been having trouble logging in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.