Dadoulis Paschalis Posted May 21, 2020 Report Share Posted May 21, 2020 Hi all I've found a g4 used one, which I assume from what I've searched here that it supports 1.5 bar of boost, since all the g4 internal map sensors were the 2.5 bar link, correct or not? In fact, how can I be sure what map this ecu has got installed? Can I find somewhere an internal one to replace this with a higher one? For example in the Lem G3 (one that I'm using now by the way) there were different versions you could order with 2.5 bar or 5 bar option. Internal map sensor is An Voltage 5, right? So if there isn't any option of replacing the internal map sensor and I was to install an external map sensor I would use one of the others An Volt, right? And if I choose one for example the 4 bar Link map, how would I choose it? Just map sensor at the analaog drop down menu and 4 bar underneath? Thanks Quote Link to comment Share on other sites More sharing options...
neil brown Posted May 21, 2020 Report Share Posted May 21, 2020 Basically yes and remember to turn off an5 as cant have 2 map Sensors active Dadoulis Paschalis 1 Quote Link to comment Share on other sites More sharing options...
Dadoulis Paschalis Posted May 21, 2020 Author Report Share Posted May 21, 2020 9 minutes ago, neil brown said: Basically yes and remember to turn off an5 as cant have 2 map Sensors active So no option for replacing the internal one? Quote Link to comment Share on other sites More sharing options...
neil brown Posted May 21, 2020 Report Share Posted May 21, 2020 You can send it to link and they can upgrade it Quote Link to comment Share on other sites More sharing options...
Dadoulis Paschalis Posted May 21, 2020 Author Report Share Posted May 21, 2020 3 hours ago, neil brown said: You can send it to link and they can upgrade it I can do soldering-desoldering...any faster way? Quote Link to comment Share on other sites More sharing options...
neil brown Posted May 21, 2020 Report Share Posted May 21, 2020 Ask for 4 bar part number mpx4400ap I think Dadoulis Paschalis 1 Quote Link to comment Share on other sites More sharing options...
Dadoulis Paschalis Posted May 21, 2020 Author Report Share Posted May 21, 2020 8 minutes ago, neil brown said: Ask for 4 bar part number mpx4400ap I think Alrady sent an email to Link TEch...:) Thanks And in fact you must be correct since the 2.5 which I have in hands is MPX4250AP, so next is MPX4400AP after little google-digging... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.