Cefiro Posted May 22, 2020 Report Share Posted May 22, 2020 Can I use the internal map sensor on my monsoon g4x to read boost pressure in bar on the pc link software and if so how do I do it Quote Link to comment Share on other sites More sharing options...
Islam fouad Posted May 22, 2020 Report Share Posted May 22, 2020 off course yes Quote Link to comment Share on other sites More sharing options...
Cefiro Posted May 22, 2020 Author Report Share Posted May 22, 2020 Ok but how, thanks in advanced Quote Link to comment Share on other sites More sharing options...
Vaughan Posted May 24, 2020 Report Share Posted May 24, 2020 The units shown can be kPa or psi, switched between by pressing the U key. If you just want a runtime displaying the pressure in bar then you can use a math block to display a converted value. 1 bar is 100kPa. Quote Link to comment Share on other sites More sharing options...
mapper Posted May 26, 2020 Report Share Posted May 26, 2020 The parameters you are looking for are MAP and MGP. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.