Guest |695| Posted September 3, 2011 Report Share Posted September 3, 2011 Hi Guys, Having a little issue with the ECU data logging, for some reason it is not logging data for the Wideband at all. Is there a setting I need to adjust or some other issue? Quote Link to comment Share on other sites More sharing options...
Guest Dave-Kriedeman Posted September 3, 2011 Report Share Posted September 3, 2011 I dont use the ECU logger, i use the PC logger or external SD Logger. ECU logger parameters are preset, you can only pretty much turn the logger on or off, select an activation and the logger rate for ECU logging. If you go to the TUNING tab at the top of VTS page and select Runtime Values and then select Analogue, does your Air Fuel Ratio have a value in it. Quote Link to comment Share on other sites More sharing options...
Guest |695| Posted September 4, 2011 Report Share Posted September 4, 2011 Thanks for the feedback Dave. I checked in the runtime values and I do have a value in there for the AFR, so not sure why it is not being logged by the ECU still. Quote Link to comment Share on other sites More sharing options...
Guest Hic Posted September 5, 2011 Report Share Posted September 5, 2011 steven under logging, choose the analog chanell that you selected for WB, do not choose Wideband. That is it. Quote Link to comment Share on other sites More sharing options...
Guest |695| Posted September 6, 2011 Report Share Posted September 6, 2011 Thanks Hic, have the data I need.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.