toy8490 Posted May 24, 2020 Report Share Posted May 24, 2020 New to Link g+4 software... I'm having troubles on how to setup My c02 boost controller in the software. I have attached a picture of my current Setup routing I have 2 mac valves. One for filling pressure to the top side of the waste gate. 2nd mac valve Dumps pressure if we get to high on boost pressure to release pressure on the waste gate. I have one pressure sensor to help watch c02 pressure on the Top side of the waste gate. So If anyone can help set this up in the system... Please try and help with my project. Thank you. Quote Link to comment Share on other sites More sharing options...
orlando bello Posted May 25, 2020 Report Share Posted May 25, 2020 There is a co2 boost control topic on the forum the guy saying that he got it to work fine .have request more information but he never replied. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 25, 2020 Report Share Posted May 25, 2020 Sorry, there is no dome pressure control functionality in the G4+ Quote Link to comment Share on other sites More sharing options...
toy8490 Posted May 25, 2020 Author Report Share Posted May 25, 2020 7 hours ago, Adamw said: Sorry, there is no dome pressure control functionality in the G4+ Any way to build this in the software?..... Or Have a similarly system that may work with c02? Quote Link to comment Share on other sites More sharing options...
toy8490 Posted May 25, 2020 Author Report Share Posted May 25, 2020 Attach co2 were compressor would have been? Then have regulator on c02 set at 50 psi. 10 lb wastegate spring. Might make 60 psi? Would this work? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 26, 2020 Report Share Posted May 26, 2020 Yes you can control a watsegate in the normal way using CO2 as your propose and it will alllow higher boost pressures. Note however it will be controlling the intake manifold pressure, not dome pressure which is what most people refer to as "CO2 boost control". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.