Jump to content

Wiring NOS into Link Fury with an arming switch


Recommended Posts

Something like below.  Switch connected to any DI.  Use a virtual aux to set up the conditions you want NOS to activate under.  In the example below, it will activate when my switch is on and RPM is above 4500 and TP is above 90%.  If you want more conditions like a window switch or whatever then you can have one of the conditions is another virtual aux, then you can add more conditions in the second virtual aux setup.  



This Virtual Aux 1 can then be used to turn on a 4D fuel table and 4D ignition table for your extra fuel and retard. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...