Devon 0 Posted June 5, 2020 Report Share Posted June 5, 2020 he there just wondering if anyone has cal table input and output values for the omni 3 bar map sensor.. I had a tune done on dyno and tuner reports that it is 40 kpa difference compared to there reading once it reches about 10 psi. Regards Devon Quote Link to post Share on other sites
Ducie54 74 Posted June 5, 2020 Report Share Posted June 5, 2020 Good luck with that brand. Chased my tail for weeks tuning using that same map sensor. I ended up throwing it in the bin. Quote Link to post Share on other sites
remski2 6 Posted June 6, 2020 Report Share Posted June 6, 2020 This one ? https://www.iapdirect.com/images/T/calibrations.pdf Quote Link to post Share on other sites
Brad Burnett 89 Posted June 7, 2020 Report Share Posted June 7, 2020 i can honestly say i have used that sensor countless times on subarus with no ill effects. Quote Link to post Share on other sites
JMP 40 Posted June 8, 2020 Report Share Posted June 8, 2020 The CAL in the PDF is what I used, sensor working perfect with this: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.