Jcsh Posted June 20, 2020 Report Share Posted June 20, 2020 I’ve just bought a Legacy rally car with the possum link. It doesn’t have a cable and I want to check it’s rev limiter status. is it possible to briefly rent or buy the cable/box from someone please? cheers james 0226353863 Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2020 Report Share Posted June 21, 2020 Any Link dealer can still sell you one, we still make them. They are not big cost, about NZD$115 at the time of writing. You will need a USB to serial adapter too. Open up the case and check that the sticker on the processor has a Q or R suffix on the end, if its earlier than that it may not be laptop tunable. Quote Link to comment Share on other sites More sharing options...
Jcsh Posted June 24, 2020 Author Report Share Posted June 24, 2020 Ok, so as on thé phone, there is no sticker. have borrowed a hand held module. is there some sort of manual for it please? I’m going to connect it tomorrow to see what version of ecu I have. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 24, 2020 Report Share Posted June 24, 2020 Go up one subject in this G1 forum, all manuals are attached in the post thats pinned to the top labelled "G1 Manuals". The Possumlink 44S, MY96, MY98 or PossumV5 will cover it depending on model. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.