therealpodge Posted June 22, 2020 Report Share Posted June 22, 2020 Hi Guys I've a link G4 extreme ecu Currently running my 13b with 4 injectors but going to add 2 more on the secondary rail for a total of 6 injectors. Is this possible to sort easily in the programming? Thanks in Advance James Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 22, 2020 Report Share Posted June 22, 2020 My suggestion would be to keep it as two stages. So your new secondaries get wired to the same drives as the existing secondaries. Then you just need to adjust the sec/pri flow ratio in the software. There are other ways to do it such as the "aux injection" function to do it in 3 stages but I dont like those due to issues with being able to use fuel cut or the rotary limiter mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.