StijnFSP Posted June 29, 2020 Report Share Posted June 29, 2020 hi i cant get this subaru started i tried : new cam an cranck sensors . and it drove into my shop on a autronic ecu perfect but he wanted to upgrade to a link G4X i added the file and scope log . can u please look at it quickly . best regards jimmy setup.pclx trigger jimmy.llgx Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted June 29, 2020 Author Report Share Posted June 29, 2020 and i get trigger 1 state out of range while crancking Quote Link to comment Share on other sites More sharing options...
TechDave Posted June 29, 2020 Report Share Posted June 29, 2020 log of an attempted start too please Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted June 29, 2020 Author Report Share Posted June 29, 2020 ok its attached. log starting jimmy.llgx Quote Link to comment Share on other sites More sharing options...
TechDave Posted June 29, 2020 Report Share Posted June 29, 2020 Can you do ignition and injection tests? I suspect the coils have been swapped out for dumb coils that the Autronic was driving directly. edit: yeah something up with Ignition, you have this basemap set to direct, but the plugin is setup for wasted spark, can you confirm these modifications have been made and are working? Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted June 29, 2020 Author Report Share Posted June 29, 2020 hi yes i added new age STI coils direct spark to it . but did this many times before. they need +12v ground and signal . i made a new loom to the ecu . so what is wrong? Quote Link to comment Share on other sites More sharing options...
TechDave Posted June 29, 2020 Report Share Posted June 29, 2020 Have you confirmed that they are operating? Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted June 29, 2020 Author Report Share Posted June 29, 2020 Yes i did . BUT after instaling the new loom permanent after testing ignition and injection the ground pin on the connecter i used popped a bit out and it didnt had good ground on the coils stupid f*** i am always looking to far . pulled the wire on the plug and the ground pin just came out thnx for the heads up but i was too focused on the triggers. TechDave 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.