evo_gerard Posted July 1, 2020 Report Share Posted July 1, 2020 hi All, strangest thing happened to me yesterday. I was going over my mapping because i found that my idle was a little high and i realised that i was my ignition idle control was not responding and the car was idling based on the values in the ignition map. its no real issue but i would like to solve it in case it becomes an issue later down the road. when i turn it off and turn it back on and zero the tables it does not respond to that zero value. it continues to happily idle at the value in the ignition map. has anyone experienced this? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 1, 2020 Report Share Posted July 1, 2020 what is the status of the idle ignition control when it is not responding to the idle ignition values? It is probably in a lockout of some form. Quote Link to comment Share on other sites More sharing options...
Poseidon Posted July 2, 2020 Report Share Posted July 2, 2020 all conditions for idling must be active, hence speed limit, tp value etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.