Jump to content

Jerking/bucking in low gear/low speed


Rozsko

Recommended Posts

Hello Gents again,

New day, new question if you don't mind.

https://1drv.ms/u/s!Ale4oyMCOgLThMpH8YTIGkT_LGav7A?e=DrnJvb

In the log above I marked a section towards the end of the log where I was coasting in 2nd gear and above idle. The car was horribly jerking/bucking which you can clearly see from the oscillation of many logged parameters.

Do you have any idea/suggestion on how to resolve this?

Thanks,

Béla

Link to comment
Share on other sites

I suspect it is the fuel table needs flattening in that area, the logged fuel table value in that area is bouncing between 47-70%.  Since the exhaust gas is moving through the system so slowly at low engine speeds you cant see the rich/lean cycling on the lambda.

k7QODWE.png

Link to comment
Share on other sites

On 7/14/2020 at 7:45 AM, Adamw said:

I suspect it is the fuel table needs flattening in that area, the logged fuel table value in that area is bouncing between 47-70%.  Since the exhaust gas is moving through the system so slowly at low engine speeds you cant see the rich/lean cycling on the lambda.

k7QODWE.png

Thanks Adam.

I gave it a try, and I can tell you it is better then before, but it needs a little more work. Hopefully I can make it smooth soon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...