Treskilyon Posted July 18, 2020 Report Posted July 18, 2020 recently installed a G4X PNP in my 95 ST205 but I realized now that my charge chargecooler pump no longer engages when I press the throttle. How do I make this work? Quote
Adamw Posted July 18, 2020 Report Posted July 18, 2020 Set up as a GP Output, I have used GP Output 4 in this example. The charge cooler pump is controlled by inj 5 so set output to Aux Fuel #5. The conditions that you want the pump to run under are up to you but the example below is probably a decent starting point, it will run whenever throttle is more than 30% or when IAT is more than 50°C, then it will keep running for 30seconds longer after those conditions are false. Quote
Treskilyon Posted July 19, 2020 Author Report Posted July 19, 2020 I just did this last night, basically it was off and now I've got it set thank you! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.