Jump to content

Link Fury Cam and Crank sensor


Recommended Posts

Hello i was checking the crank and cam sensor on a seadoo jetski and i found that i have no crank signal no matter how i wire it. It's a 2 wire reluctor sensor 36-2 teeth. the cam sensor is optical with 3 wires. Cam signal is okay but it needs to be reversed i tried to change the wires and it still did not change the signal.

 

Trigger Scope Log 2020-07-24 4;14;32 pm.llg Trigger Scope Log 2020-07-24 4;19;39 pm.llg

Link to post
Share on other sites

The triggerscope doesnt lie, if it shows no signal then there is no signal.

If you are 100% sure the wiring is correct then it is possibly some odd type of active sensor.  If you unplug the loom from the ECU and measure resistance between the trig 1 wire/pin and the shield/gnd wire/pin in the ecu plug what resistance do you get?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...