1320MINI 3 Posted July 26, 2020 Report Share Posted July 26, 2020 Hi Guys, Couple of issues, I've converted to a G4x, I used the CAN stream from the link below. The Standard dash channels all work but the 2 extra Digital channel's don't display on the Dash. http://forums.linkecu.com/topic/7039-digital-input-state-via-can/ Also i was trying to set up a virtual Aux channel but only have the following options,(OFF , Test ON , ON/OFF) The G4+ use to give a list of different options.I was looking to use it as a GP output. Quote Link to post Share on other sites
Vaughan 61 Posted July 26, 2020 Report Share Posted July 26, 2020 to use a virtual aux as a gp output go to Auxiliary Outputs > GP Output, select an available gp output and set its 'Output' to the virtual aux you want to use. can you attach a copy of your basemap to show what you've done for the CAN stuff please Quote Link to post Share on other sites
1320MINI 3 Posted July 28, 2020 Author Report Share Posted July 28, 2020 Thank you for the above, I'll get a copy of the CAN stuff. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.