Jump to content

Aggressive rev limiter for drift build


Recommended Posts

Hi team, 

Wanting to setup a more aggressive rev limiter(flames and bangs) than stock. 

I guessing if you use ignition cut you would loose all power mid drift. 

If anyone could give me advice on what sort of setting would achieve this that would be great, thanks

My setup:

Link g4+ plug and play

Forged Sr20det 

 

Link to post
Share on other sites

Aggressive limiter with the SR20 valve train is not a great idea.  They can stand up well if built by someone that understands valve train dynamics well but for the typical drift level engine build I would strongly advise against sustained aggressive limiting with a SR20, it is well demonstrated you need very little float before a rocker will jump off the pedestal and that usually results in a valve pushed through the piston at the same time.  

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...