Mr Rieper Posted August 8, 2020 Report Share Posted August 8, 2020 Hi guys Hoping someone can help me out with the new vvt setup process as i'm having a few issues with it. I've done the calibrate as per the Link help and it was throwing a bunch of errors once the lockouts were passed on a static 1500-2000rpms. i adjusted the tooth offset slightly which stabilised it but still get a bunch of errors in the midrange which seem to clear up after 5000rpm or so. The vehicle has Piper 276 cams installed for info purposes. i'll attach a log. Any help would be great but i'm assuming it'll be a case of setting everything manually ? Cheers vvt issue.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 8, 2020 Report Share Posted August 8, 2020 Can you first update to the latest firmware, run the calibrate again, then if still a problem, attach a new log, the tune file, and a triggerscope done at idle. Quote Link to comment Share on other sites More sharing options...
Mr Rieper Posted August 17, 2020 Author Report Share Posted August 17, 2020 Firmware update resolved this issue now sits bang on target. thanksfor the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.