autolove Posted August 12, 2020 Report Share Posted August 12, 2020 Hello, In the Evo 9 base configuration the oil pressure input source isn't configured. I'm checking to see if anyone knows what source the OEM oil pressure sensor would be on. Many thanks. Cheers, André Quote Link to comment Share on other sites More sharing options...
Vaughan Posted August 12, 2020 Report Share Posted August 12, 2020 I don't know the EVOs particularly well but I would hazard a guess that the factory oil pressure sensor is a switch type rather than a pressure output and is connected directly to the dash cluster oil light? autolove 1 Quote Link to comment Share on other sites More sharing options...
Bethanyc Posted August 13, 2020 Report Share Posted August 13, 2020 there is no linear oil pressure sensor, it is just a on/off to the dash, you will need to run a remote line to a sensor off the filter housing (dont hardmount) or a sensor on the turbo feed line. autolove 1 Quote Link to comment Share on other sites More sharing options...
autolove Posted August 13, 2020 Author Report Share Posted August 13, 2020 @Vaughan @Bethanyc Many thanks, that makes perfect sense. Wired the output from my AEM oil pressure setup into the expansion loom and it's all set now. Much appreciated. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.