Jump to content

Evo 8 plugin


Recommended Posts

Hello, yesterday I sold my evo 4-8 ethrottle plugin ecu to evo 8 (my car is evo6). I upload the base calibration into the ecu and changed the trigger mode to evo 7-9. Map sensor and tps sensor calibrated but engine didn’t start. I make test to injectors and coils and they are working. Trigger 1 and 2 are yes on cranking and no trig error. Evo 8 is european market version. Is there any jumper or setting I need to check ? 

Link to comment
Share on other sites

No it should still run without changing any jumpers.  The jumpers only effect the intercooler water spray and the cat converter lamp.

Some odd models have the AC clutch and FP Relay pins swapped.  Do you hear the fuel pump prime when you first turn the ignition on?  If not then try setting Ign 3 to " test (ON)" to see if the fuel pump runs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...