Guest |229| Posted November 24, 2011 Report Share Posted November 24, 2011 Hi all. New firmware. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 27, 2011 Report Share Posted November 27, 2011 http://www.vi-pec.com/software/VTS_V4-8-8_Setup.exe Quote Link to comment Share on other sites More sharing options...
Apex Speed Tech Posted November 28, 2011 Report Share Posted November 28, 2011 What's new Simon? Quote Link to comment Share on other sites More sharing options...
Guest |851| Posted November 28, 2011 Report Share Posted November 28, 2011 from the release note: Release Version 4.x.x.1112 New Features · Logging sample history. PC Logging now keeps a rolling history of all parameters selected for PC Logging. This allows snake trails to be displayed on all tables (previously only displayed on tables being viewed). · Pre-pend history to log file. The sample history can be automatically added to the start of PC log files. Eg if a glitch happens when not logging, can press F8 and catch it in the history. · Surface graph position and reverse bottom axis setting is now remembered for each table. · Table snake trails can now be globally turned on, off or paused with a single key (F6). · Log views now show status type parameters as their actual text labels (eg ON or OFF instead of 1 or 0). · An option has been added to PC Logging Setup to select either a zoom all or zoom to shortest section upon opening a log file. · A new option has been added to the log parameter select window to only list parameters actually contained in the current log file. · An all new axis setup form. · Settings groups can now be opened from the ECU Settings Menu by pressing Ctrl while clicking on a heading. Eg This allows all Aux Outputs to be listed in a single settings view rather than clicking Aux1, Aux 2 etc. Or, viewing of all fuel corrections in one settings tree. Fixes · GP Aux Output switching condition values could not go below 0 when using temperature as a condition. · The save file name was not reset when changing from one ECU to another that were exactly the same type and FW version but different serial number. · Extrapolate function did not work correctly on tables. · Launch Control ignition trim could not go to positive numbers. · Many memory leaks that could cause excessive memory use when the application is open for extended periods. Changes · Some re-labeling of trigger mode options to make better alphabetical search. Cosmetic change only. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.