MichaelR32GTR Posted August 24, 2020 Report Share Posted August 24, 2020 hello could someone please tell me what ignition timing I'm running from 6000rpm (max boost) to redline 9000+ rpm, should be running around 32-34psi boost or so thanks https://drive.google.com/file/d/1Y5jJv939ybvyZako4nvtsJ8pUwd34qRo/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted August 27, 2020 Author Report Share Posted August 27, 2020 Sorry not sure if that worked or I need to also attach my tune file as well as log file thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 27, 2020 Report Share Posted August 27, 2020 Something wrong with the permissions on the shared file. Right click on it in google drive, choose share, then make sure the permissions thing is set to "anyone with link". Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted August 27, 2020 Author Report Share Posted August 27, 2020 my bad,,, should be ok now https://drive.google.com/file/d/1Y5jJv939ybvyZako4nvtsJ8pUwd34qRo/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 27, 2020 Report Share Posted August 27, 2020 Approx 20 deg. Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted August 27, 2020 Author Report Share Posted August 27, 2020 Is it possible to take 2 degrees timing out from peak boost (6000rpm) to redline (9500rpm) do I need to post my tune file or anything else ? Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted August 30, 2020 Author Report Share Posted August 30, 2020 If I want to remove some timing from when it makes full boost which is mid to high 5000rpm to redline 9500rpm and from gate pressure 24psi up to full boost 35psi can I lower the values in this box see link below) but still have a slight gradual increase as it approaches redline ? hoping to remove between 2 and 4 degrees where possible https://drive.google.com/file/d/1-8i87avyPNqCQbtEOaXp7BQb1hb8VzzA/view?usp=drivesdk Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 30, 2020 Report Share Posted August 30, 2020 Yes that would be correct. Just highlight all the cells you want to adjust like you have in the pic and type -4 and hit enter. Dont forget to do a store afterwards. Quote Link to comment Share on other sites More sharing options...
MichaelR32GTR Posted August 30, 2020 Author Report Share Posted August 30, 2020 Perfect Thankyou Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.