Jump to content

V5-6 plugin drivers not active


The green light

Recommended Posts

Hi guys I am having trouble trying to work out why my two ignition drivers and injection drivers will not come up as on or active in the configuration screen. The ECU hold is ok and I am getting a crank I have checked that the injectors and the coil are getting power and that the wires from the ECU to the injectors and coil are good. The car was running  and then I  wired up the red counter  oil pressure light and charge light to the dash, I then ran the car again and everything seemed fine but the next day I could not get it to start. Any thoughts on what else should I be checking?

Link to comment
Share on other sites

It is normal for the status runtimes to show off all the time for injectors and ign - they only show active when the drives are assigned as aux outputs.

Do you have RPM showing in the software when cranking?

Do the injectors click when you set them to test mode?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...