180sxdeano Posted November 1, 2020 Report Posted November 1, 2020 Hey guys, So have had this link sitting around for a while and trying to get it in now. Had a question with the CAN wiring. How do you guys make it work? Also see photo's would it work if I wired it into my old haltec CAN hub, I like the idea of it being able to be disconnected easy with out having to pull the cover/ECU out and all. Rainy day (weeks) so figured I'd try get this finalized and tuned in the next few week finally!!. Any help or ideas would be appreciated. Quote
Adamw Posted November 1, 2020 Report Posted November 1, 2020 Pinout for the 5 pin CAN socket is below. You only need the CAN H/L. Quote
180sxdeano Posted November 2, 2020 Author Report Posted November 2, 2020 On 11/1/2020 at 7:12 PM, Adamw said: Pinout for the 5 pin CAN socket is below. You only need the CAN H/L. yeah got this, also is there any instructions or special crimp tool needed? i can seem to get it, pins too small and keep snapping in mine, or is there one i can buy? Quote
Adamw Posted November 2, 2020 Report Posted November 2, 2020 Yeah they are difficult to crimp. I have a few micro crimp tools that do them well but are a bit pricey to recommend for a 1off. Try Iwiss IWS- 2820M. Quote
Robsevo9 Posted April 19, 2023 Report Posted April 19, 2023 On 11/1/2020 at 3:12 AM, Adamw said: Pinout for the 5 pin CAN socket is below. You only need the CAN H/L. Hello, where can I buy this cable? I need one for my WB. Thank you Quote
Adamw Posted April 19, 2023 Report Posted April 19, 2023 Assuming an Evo9 ecu, probably the best cable for you would be the CANJST, you can order through any Link dealer. https://dealers.linkecu.com/ADA_2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.