Multi tooth question

[rot62]

Hi 

I have a nissan v8 using a SNZ ecu and the  multi tooth is setup as 4+1 crank trigger setup.  So there are 5 teeth on the crank, 4 teeth are at 90 deg from each other and the  sync tooth is about 12 deg out from one of the 4 at 90 deg. 

Question is how do I set up this in a G4X?

or can i cut off the sync tooth and one of the other four and do a Multi/ missing setup ie 4-1

Thanks

[Adamw]

Try yamaha wave runner mode.  It is a 4+1, Im not sure on the exact angle of the extra tooth but it looks around 14 to 15deg.