Jump to content

Haltech ic7


Enis vl
 Share

Recommended Posts

Hi there guys I have a vl turbo with a linkg4x I have connected a lambda o2 to can 1 and I have purchased a Haltech ic7 and I connected to can2 I want protocols did you put in the ecu for it to get information from ecu to dash, and also how can I get the kilometeres to work can I also get a gps via can, but there’s is only 2 can inputs 

Link to comment
Share on other sites

Set up instructions for the ECU are in the Haltech ICC software help file.  

You dont need a separate CAN bus for each device, assuming they all run at the same bit rate or have a configurable bitrate you can connect all devices to the same CAN bus.  So GPS can likely connect to either bus.  Let me know what GPS you have and I will confirm bit rate.  

Link to comment
Share on other sites

  • 2 months later...

I have a IC-7 on a R32GTR , we have changed the speedo (odometer) drive from Cable to electronic using a 33GTR sensor , can make everything work speed on the dash speed will only work using RR Wheel speed -gear position works using either LR or RR but cant get the Odometer to work, seem the Haltech dash uses LR  speed that is used for Odometer to be driven.

I have doubled up the input for RR and LR with Di3 where the speed  signal is inputted 

 

Any one else got the Odometer working on and IC-7 dash with a Link G4X ECU

 

Thanks

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...